1. Local settings:
Select under "More" -> Settings -> System parameters.
Now select the country where the inverter is installed and the grid code will be set.
2. iSolarCloud remote setting:
Select your inverter under Settings and then click on Initial Grid Connection.
Now select the country in which the inverter is installed and the grid type and set any other grid-specific parameters. The parameters are then sent to the inverter and set with Apply settings.
In some countries, more network-specific settings may be necessary. You will find these in the Advanced parameter settings under Power control mode.
For further information, please download the user manual for:
This manual is intended for professional technicians who are responsible for installation, operation, maintenance and troubleshooting of inverters, and users who need to check inverter parameters. The inverter must only be installed by professional technicians.
The professional technician is required to meet the following requirements:
Know electronic, electrical wiring and mechanical expertise, and be familiar with electrical and mechanical schematics.
Have received professional training related to the installation, commissioning and troubleshooting of electrical equipment.
Be able to quickly respond to hazards or emergencies that occur during installation, commissioning and troubleshooting.
Be familiar with local standards and relevant safety regulations of electrical systems.
Read this manual thoroughly and understand the safety instructions related to operations.