1. Local settings:
Select under "More" -> Settings -> System parameters.
Now select the country where the inverter is installed and the grid code will be set.
2. iSolarCloud remote setting:
Select your inverter under Settings and then click on Initial Grid Connection.
Now select the country in which the inverter is installed and the grid type and set any other grid-specific parameters. The parameters are then sent to the inverter and set with Apply settings.
For some specific countries, it is required to perform additional manual settings. Follow the separate manual settings guideline. Enter the correct settings in the Common Parameters – Power control.
For further information, please download the user manual here.
This manual is intended for professional technicians who are responsible for installation, operation, maintenance and troubleshooting of inverters, and users who need to check inverter parameters. The inverter must only be installed by professional technicians.
The professional technician is required to meet the following requirements:
Know electronic, electrical wiring and mechanical expertise, and be familiar with electrical and mechanical schematics.
Have received professional training related to the installation, commissioning and troubleshooting of electrical equipment.
Be able to quickly respond to hazards or emergencies that occur during installation, commissioning and troubleshooting.
Be familiar with local standards and relevant safety regulations of electrical systems.
Read this manual thoroughly and understand the safety instructions related to operations.