This document explains connection to WEB UI of DataLogger1000 and WiNet S. The method of connecting to both device is identical and they share the WEB UI as well to certain extent. It is possible to connect to both devices with Lap top and a mobile phone and no additional software or applications are required except a Web Browser (Chrome, Edge or similar).
Using this method for troubleshooting internet connection helps installer understand the problem and solve it in a timely manner.
WEB UI is accessible over LAN and WiFi on both devices. To access it over WiFi the customer has to connect with a smart phone or lap top to the WiFi hotspot from the device. The Hotspot signal is usually shown as SG-B2xxxxxxxx. After connecting to the hotspot try opening a web browser and typing 11.11.11.1 this will lead you to registration pop up.
Credentials between WiNet S and DataLogger are slightly different and they are:
The following pop up will appear:
The system is asking for modifying password, where the customer can set more secure password than the standard one.
The block can be closed by clicking on „x“ or after changing the password the main page of WEB UI will be displayed.
From this point customer can set up all relevant parameters for inverter and DataLogger/ WiNet-S(2) commissioning and operation.
