Log in to the Web interface of EyeM4
EyeM4 wireless communication module (except EyeM4-B) supports WiFi login. After the device is powered on, check the SN code on the device, and select the WiFi hotspot signal named SG-XXXX (XXXX is the device SN) to connect to WiFi.
Enter the default IP address of EyeM4 in the browser address bar after the device is connected: 11.11.11.1 to open the device management interface, and the initial password is pw1111. After logging in, the main interface of EyeM4 is shown in the following figure.
System Update
Open System, click System Maintenance and select System Update. Choose iSolarCloud Upgrade Package. The Logger will now download the latest firmware and install it.
For further information, please download the user manual here.
This manual is intended for professional technicians who are responsible for installation, operation, maintenance and troubleshooting of inverters, and users who need to check inverter parameters. The inverter must only be installed by professional technicians.
The professional technician is required to meet the following requirements:
Know electronic, electrical wiring and mechanical expertise, and be familiar with electrical and mechanical schematics.
Have received professional training related to the installation, commissioning and troubleshooting of electrical equipment.
Be able to quickly respond to hazards or emergencies that occur during installation, commissioning and troubleshooting.
Be familiar with local standards and relevant safety regulations of electrical systems.
Read this manual thoroughly and understand the safety instructions related to operations.