How can I create or modify my PV plant physical layout?
– Physical Layout: Shows the installation position and angle of the microinverter and
PV modules.
– Logical Layout: Shows the connection between the microinverter and PV modules
and their assignment status.
Choose the Layout tab at the top of the screen
Click on "Layout Setting". The physical layout will be displayed on the screen.
Press on the panel you want to modify and allocate freely on the screen. Make sure tha panel is correctly allocated to the right microinverter, by checking in the Device tab.
On the upper right part of the screen, click on "Save" and then, "Upload", as shown in the images, and finally Confirm.
For further information, please download the user manual accordingly:
This manual is intended for professional technicians who are responsible for installation, operation, maintenance and troubleshooting of inverters, and users who need to check inverter parameters. The inverter must only be installed by professional technicians.
The professional technician is required to meet the following requirements:
Know electronic, electrical wiring and mechanical expertise, and be familiar with electrical and mechanical schematics.
Have received professional training related to the installation, commissioning and troubleshooting of electrical equipment.
Be able to quickly respond to hazards or emergencies that occur during installation, commissioning and troubleshooting.
Be familiar with local standards and relevant safety regulations of electrical systems.
Read this manual thoroughly and understand the safety instructions related to operations.