These faults apply to the following sungrow products:
SG30CX / SG33CX / SG40CX / SG50CX / SG110CX
SG2.0RS-S / SG2.5RS-S / SG3.0RS-S / SG3.0RS /SG3.6RS / SG4.0RS / SG5.0RS / SG6.0RS
SH3.0RS/SH3.6RS/SH4.0RS/SH5.0RS/SH6.0RS
In the event of Fault Code 8 being informed through the App, the following corrective measures shall be taken:
Output Overvoltage (Code 008)
Fault Name | Output Overvoltage (fault code: 008) |
Fault Type | Fault |
Fault Condition | The output voltage exceeds the set limit value |
Troubleshooting steps and methods | 1. Check whether the alarm still exists after this alarm is cleared. 2. If the alarm persists, please contact Sungrow Customer Service. |
keywords: 008, 08, 8, code 8
For further information, please download the user manual here.
This manual is intended for professional technicians who are responsible for installation, operation, maintenance and troubleshooting of inverters, and users who need to check inverter parameters. The inverter must only be installed by professional technicians.
The professional technician is required to meet the following requirements:
Know electronic, electrical wiring and mechanical expertise, and be familiar with electrical and mechanical schematics.
Have received professional training related to the installation, commissioning and troubleshooting of electrical equipment.
Be able to quickly respond to hazards or emergencies that occur during installation, commissioning and troubleshooting.
Be familiar with local standards and relevant safety regulations of electrical systems.
Read this manual thoroughly and understand the safety instructions related to operations.