The Backup-Mode can be set remotely though the iSolarCloud APP or the website.
Through iSolarCloud website: remote setting
After logging with your account, select on the left bar "Settings", and then inside this tab, select the plant and click on "Common Parameter Settings". Note that the Initial Grid should have been Already set.
Fig.1.
2. In the Common Parameter Settings, navigate to Power Control.
3. Here you can enable Backup Mode and set the Reserved Battery SOC for Off-Grid operation.
Fig.2.
To finalize and confirm these adjustments, remember to apply the settings.
Note: After the backup mode is enabled, the battery can always reserve at least the setting SOC when the grid is available, to make sure a certain battery capacity is guaranteed when grid fails. Once the SOC reaches this setting value and the grid is available, the battery will stop discharging even though the system may still be in the set discharge time period.
Please be aware, that this Reserved Battery SOC cannot be used in daily operation as it is reserved for a power outage.
Through iSolarCloud app:
Similarly as in the webpage, in the Plant Overview, select the Device tab.
Choose the Inverter you want to activate the Backup Mode.
Scroll right until you can reach Settings.
Within Settings, enter "Power Control".
Fig.3.
5. Within "Power Control", you can now enable Backup mode
6. and set the value for Reserved Battery SOC for Off-Grid.
Fig.4
Please be aware, that this Reserved Battery SOC cannot be used in daily operation as it is reserved for a power outage.
To finalize and confirm these adjustments, remember to apply the settings.
For further information, please download the user manual accordingly:
This manual is intended for professional technicians who are responsible for installation, operation, maintenance and troubleshooting of inverters, and users who need to check inverter parameters. The inverter must only be installed by professional technicians.
The professional technician is required to meet the following requirements:
Know electronic, electrical wiring and mechanical expertise, and be familiar with electrical and mechanical schematics.
Have received professional training related to the installation, commissioning and troubleshooting of electrical equipment.
Be able to quickly respond to hazards or emergencies that occur during installation, commissioning and troubleshooting.
Be familiar with local standards and relevant safety regulations of electrical systems.
Read this manual thoroughly and understand the safety instructions related to operations.